Brand : ASHUN
Nylon Tube
? Excellent in weather resistance
? Good aging
? Resists abrasion and vibration
? High tensile strength and modulus of elasticity
? High impact resistance, a high heat distortion?temperature
??Can withstand contact with chemicals, alkalis,?dilute?acids or oxidizing agents
Application
For Hydraulic Hoses, Robotics, and Vacuum, Fuel, Vapor, Air and Brake lines.?Its Heat Resistance and UV Stabilization Make it Resistant to?Stress-Cracking, So it Works Well in Sunny Areas.
Brand : ASHUN
PolyurethaneTube
? High?flexibility?
? Small bending radius
? Widely used in many applications?
??Available in ether and ester types
??Optimum abrasion resistance
??High tensile strength
??Low temperature flexibility
Application
Automated machinery, coating machinery, all kinds of pneumatic tools, pneumatic & hydraulic machinery, construction and various pneumatic tools. Polyether based polyurethane tube is hydrolysis-resistant, anti-bacterial & anti-fungous, and it can be used for gardening, cleaning, water hoses and other purposes.?Ether type polyurethane tube?is resistance to hydrolysis, fungus and weatherability. Ester type polyurethane tube give maximum abrasion resistance and good oil, solvent and great resistance.
Brand : AUTOFLEX
FLEXIBLE PVC SPIRAL STEEL WIRE REINFORCED HOSE OR FLEXIBLE PVC SUPER SUN SPRING HOSE: SUPER SUN SPRING HOSE.
With hard steel wires put inside, this hose withstands to decompression, which is appropriate for vacuuming applications.Superior in transparency, this hose is appropriate for piping of operating oil
Brand : POFPO
POFPO Rubber flexible joint are desi gned for tough demanding indusreial application,as found in : Air conditioning-heating and ventilating systems,chemical-petrochemical and industrial process piping systems. Power generating systems, marine service, pulp & paper systems,water-wastewater sewage and pollution control system. Instsalled next to mechanical equiment or between the anchor point of piping system. Specify the POFPO Rubber flexible joint to :
1.Absorb pipe/movement/stress
2. Decrease systems noise
3. Isolate Vibration
4. Compensate alignment/offset
5. Eliminate electrolysis
6. Protect against start up,Surge forces
Features:
-Vibration,Sound And Shock Absorption
-Higher Burst Strength
-Greater Recovery From Movement
-Free From Corrosion
-Security Assured In Usage
-Low Deformation Under Pressure
-Suitable For Suction And Delivery
-Greater Movements are Availlable
STEAM HOSE COVER.BLACK - EPDM T330AA : SATURATED STEAM 17 BAR (250 PSI) STEEL REINFORCED BS 5342 / 2A NFT 47263 / I3
T330AA - 250 PSI EPDM STEAM HOSE
APPLICATION : The transfer of saturated steam up to 250 PSI AND 406?F. Use with superheated steam will shorten hose life. * Proper draining of steam hose after each use will increase service life. * Not recommended for washdown applications where detergent or oils are present. WORKING PRESSURE : Constant Pressure ? 17 Bar (250 PSI)
? STEAM HOSE AH-RED : EPDM T330AH - 17 BAR OR 250 PSI
330AH - 250 PSI EPDM STEAM HOSE
APPLICATION:The transfer of saturated steam up to 250 PSI AND 406?F. Use with superheated steam will shorten hose life. * Proper draining of steam hose after each use will increase service life. * Not recommended for washdown applications where detergent or oils are present. WORKING PRESSURE : Constant Pressure ? 17 Bar (250 PSI)
STEAM HOSE AH-RED/AH-BLACK : EPDM T330AH / T330AA - 17 BAR OR 250 PSI
T330AH /T330AA - 250 PSI EPDM STEAM HOSE
APPLICATION:The transfer of saturated steam up to 250 PSI AND 406?F.
Use with superheated steam will shorten hose life.
* Proper draining of steam hose after each use will increase service life.
* Not recommended for washdown applications where detergent or oils are present.
WORKING PRESSURE : Constant Pressure ? 17 Bar (250 PSI)
PETROLEUM SUCTION HOSE OR FUEL - OIL S&D T605 - 10 BAR OR 150 PSI BLACK
T605AA - 150 PSI Black Petroleum Suction Hose
Application: For suction and discharge applications in truck and tank car transfer of gasoline, oil and other petroleum-based products with up to 50% aromatic content.
Note: T605AA is not recommended for use on a reel.
WORKING PRESSURE : Constant Pressure 150 PSI
Construction :
-Tube: Black conductive NBR
-Reinforcement : High tensile textile cords and steel helix wires.
Cover : Black CR ? abrasion, ozone and hydrocarbon resistant.
Temperature : -22 to 176 ?F ,-30 to 80 ?C
Flexor 3 Hydraulic Hose
Textile-reinforced hydraulic hose with two braids - TR3
Application MEDIUM PRESSURE HYDRAULIC LINES, FUEL OIL, ANTIFREEZE SOLUTIONS, AIR AND WATER.
HYDRAULIC HOSESE / Alfagoma Flexor 13 - MSHA SAE 100 R13 - EN 856 R13
Application: very high pulsating pressure in hydraulic lines, fuel oil, antifreeze solutions, air and water, most severe environments
HYDRAULIC HOSE FLEXOR 12 MSHA SAE 100 R12 - EN 856 R12 : WIRE SPIRAL - 898AA
APPLICATION: VERY HIGH PRESSURE HYDRAULIC LINES, FUEL OIL, ANTIFREEZE SOLUTIONS, AIR AND WATER
SLIP - ON FLANGES
Specifications
1.Size:3/8"~40" DN10~DN1000
2.Pressure
American Series: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS 2500
European Series: PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400
3.Flange Facing Types
American Series: Flat Face (FF), Groove (G), Ring Joints Face(R)
MULTIPURPOSE HOSE PH368 / POLYESTER TEXTILE YARM BRAIDING
Application: Polyhose PropLow working Pressure for various kinds of application. The Hose can be used with Air,Gas,Water, and Petroleum, Synthetic or Water based fluids, Suitable for agricultural Automotives, and General industrial purposes
Applicable Standard: Polyhose proprietary Product SAE
Construction:
Core: Black Plasticized PVC
Reinforcement: Polyester textile yarm braiding.
Cover: red Color, Abrasion Resistance thermoTemperature Range:
Continuous: -40?C to +60?C
GLAND PACKING 4001 PTFE With Lubricate Dipped Braided Packing Product Details Model NO.: MK-4001 Standard: Standard Material: PTFE+ Silicone Oil Usage: Pump, Compressor, Valve Size Range: 4mm-50mm Product Description 1.Braided with Pure PTFE yarn and treated with high temperature-resistant silicone oil, minimizing shaft worn-out due to best self-lubrication. applicable for dynamic seal at high linear speed. 2. 100% White Expanded PTFE Packing is designed for use in valves, but can be used in other low speed services. 3. Fast and simple to install, with minimum maintenance requirements. Pure Teflon Packing can be adjusted very finely and reduced to extremely low levels. 4. High chemical resistance, very low coefficients of friction. 5. 100% White Expanded PTFE Packing is suitable for valves and pumps used in food processing, pharmaceuticals, paper mills, fiber plant, where high purity and corrosion resistance is required.
EPM, EPDM (Ethylene-Propylene Rubber): EPDM is not resistant to mineral oil based fluids and greases, synthetic hydrocarbon lubricants, organic ester based lubricants and hydrocarbon fuels.
Temperature Range: -50?C To +150?C
Chemicall Resistance: Hot water and steam (up to 150 ?C) glycol based brake fluids organic and inorganic acids cleaning agents, soda and potassium alkalis phosphate-ester based hydraulic fluids polar sovents (Alcohol, Ketones, Esters) Ozone, Weather and Ageing Resistant
Applications: Brake fluid components window profiles hot water applications
Not compatible with: Mineral Oils