Jet Cooler (cold air generator)
Jet Cooler (cold air generator) SANWA JET COOLER COLD AIR GENERATOR Jet Air Coolersคูลเลอร์แอร์เจ็ท 190-75SV 185-65SV 160-65SV เหมาะสำหรับการใช้ลดความร้อนของชิ้นงานทั้งานเชื่อม งานกลึง งานแม่พิมพ์ JET COOLER COLD AIR GENERATOR Jet Air Coolersคูลเลอร์แอร์เจ็ท อุปกรณ์ช่วยลดอุณหภูมิชิ้นงาน air jet Jet Cooler (cold air generator) JET COOLER (COLD AIR GENERATOR)
Last Update : 10:52:56 18/01/2021
Machine Vision คืออะไร
Machine Vision คืออะไร การใช้งานอุปกรณ์ Vision Sensor และ Rejection System ระบบแมชชีนวิชั่น เป็นระบบที่ใช้สำหรับงานตรวจสอบทางกายภาพของผลิตภัณฑ์ โดยมีระบบการประมวลผลที่ใกล้เคียงกับการทำงานของมนุษย์ สามารถตัดสินใจได้และส่งผลลัพธ์ที่ต้องการได้ตามโปรแกรมที่กำหนดไว้ ในปัจจุบันระบบวิชั่นได้เข้ามามีบทบาทในงานอุตสาหกรรมต่างๆ มากขึ้น เช่น อุตสาหกรรมยานยนต์ อุตสาหกรรมเซมิคอนดักเตอร์และอิเล็กทรอนิกส์ อุตสาหกรรมอาหารและเครื่องดื่ม อุตสาหกรรมบรรจุภัณฑ์ อุตสาหกรรมยาและเวชภัณฑ์ อุปกรณ์ทางการแพทย์
Last Update : 15:44:19 28/11/2020
Vision Machine
Vision Machine(เครื่องตรวจสอบคัดแยกชิ้นงานอัตโนมัติ)ระบบควบคุมคุณภาพชิ้นงานอัตโนมัติที่ใช้ Vision Sensor เครื่องตรวจสอบคุณภาพชิ้นงานอัตโนมัติที่ใช้ Vision Vision Machine เครื่องตรวจสอบชิ้นงานด้วยกล้อง
Last Update : 15:26:49 28/11/2020
SMW-AUTOBLOK The future in the view
SMW-AUTOBLOK The future in the view
Last Update : 11:24:25 01/04/2017
Drawbar Clamping Forces
แรงดึงในเอกสารนี้มีที่มาจากมาตรฐานสากลและผู้ผลิตอุปกรณ์จับยึด ข้อมูลนี้ใช้สำหรับการอ้างอิงเท่านั้น: สำหรับข้อกำหนดเฉพาะสำหรับเครื่องเฉพาะเครื่องควรติดต่อผู้สร้างเครื่อง ทั้งนี้ขึ้นอยู่กับการประยุกต์ใช้เป็นปกติสำหรับผู้สร้างเครื่องในการออกแบบเครื่องสำหรับแรงสูงหรือต่ำกว่า
Last Update : 11:15:26 01/04/2017
เครื่องลับกรรไกรและบริการลับคมกรรไกร ศรีราชา ชลบุรี
Brand : TORMEK
เครื่องลับกรรไกรและบริการลับคมกรรไกร ศรีราชา ชลบุรี เครื่องลับกรรไกรและบริการลับคมกรรไกร ศรีราชา ชลบุรี เครื่องลับกรรไกรและบริการลับคมกรรไกร ศรีราชา ชลบุรี เครื่องลับกรรไกรและบริการลับคมกรรไกร ศรีราชา ชลบุรี เครื่องลับกรรไกรและบริการลับคมกรรไกร ศรีราชา ชลบุรี เครื่องลับกรรไกรและบริการลับคมกรรไกร ศรีราชา ชลบุรี เครื่องลับกรรไกรและบริการลับคมกรรไกร ศรีราชา ชลบุรี
Last Update : 11:36:22 08/04/2021
Universal Concentricity Gages
Brand : Universal Concentricity Gages
Concentricity Gages accuracy. Precision Gold Gages are guaranteed better than ? 2?m
Last Update : 17:54:03 30/03/2021
เครื่องมือทดสอบวัดศูนย์กลาง
Brand : CONCENTRICITY GAUGE
เครื่องมือทดสอบวัดศูนย์กลาง Runout Gauge Dial Indicator Rotor runout gauge การวัดความร่วมศูนย์คือการตรวจสอบความแม่นยำของความร่วมศูนย์ของแกนทรงกระบอก 2 ชิ้นที่มีจุดศูนย์กลางตรงกัน Datum จะเป็นจุดศูนย์กลาง (ระนาบ) ซึ่งแตกต่างจากความร่วมแกน
Last Update : 08:29:02 23/03/2021
RUN OUT GAUGE
Brand : CONCENTRICITY GAUGE
Model : RUN OUT GAUGE
RUN OUT GAUGE CONCENTRICITY GAUGE Concentricity gauges RUN OUT GAUGE CONCENTRICITY GAUGE Concentricity gauges RUN OUT GAUGE CONCENTRICITY GAUGE Concentricity gauges RUN OUT GAUGE CONCENTRICITY GAUGE Concentricity gauges
Last Update : 10:44:01 22/03/2021
Chuck Force Gauges
Brand : TAC Rockford
Model : Chuck Force Gauges
Chuck Force Gauges ForceCheck Turning-Center Chuck Force Gauges wireless chuck force gauge Chuck Force Gauges ForceCheck Turning-Center Chuck Force Gauges wireless chuck force gauge Chuck Force Gauges ForceCheck Turning-Center Chuck Force Gauges wireless chuck force gauge
Last Update : 15:50:59 05/03/2021

Page View  404  
Product Information :

Product Name:  
Stationary Air Chuck for Machining Center
Product Category:   เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
Product Sub-Category:   AIR CHUCK
Brand:   CHANDOX 
Product Type :   สินค้า, ผลิตภัณฑ์ 
Short Description :   CHANDOX Stationary Air Chuck for Machining Center
     
 

MD,MFR

NEW Patent Number:M600213(MD) & M600212 (MFR)

Air Chuck Fixture

MD : SINGLE PISTON
MFR : TWIN PISTON
  1. Front-lock design?easy installation & save a apace.
  2. Available on multi-plate for mass production.
  3. Rust-proof for pneumatic cylinder.
  4. Dusts-proof & water-proof design to maintain its accuracy and lead to longer service life.
  5. Twin-pistons to increase the clamping force for heavy-duty cutting.(for twin piston only)

 

MO,MOT

3-Jaw Hollow Power Chuck Fixtures

 

With built-in type cylinder, it is ideal for machining application on working table.

  1. Rust-proof for Pneumatic Cylinder?Inside wall of cylinder being rustproof treated? cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
  2. Dusts-proof and Waterproof? Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
  3. Benefit of Built-in Cylinder?The cylinder is connected to chuck itself directly for obtaining better stability, less space, and higher machining efficiency.
DIMENSIONS
proimages/products/02-Pneumatic_Chucks_Series/MO/MO_dim.jpg
SPECIFICATIONS

Unit / mm

MODEL / SPEC. A B C D E F G H I J K L M N O P R S
MO-04 157 115 - 15 77.5 104 26 49.5 14 10 23 13 Ø9(PCD Ø135) PT1/8 M8×1.25P 3-M8×1.25P (PCDØ90) 64 47
MO-05 185 135 - 15 95 128 33 62 14 10 25 13 Ø9(PCD Ø165) PT1/4 M8×1.25P 3-M8×1.25P (PCDØ100) 80 47
MO-06 224 169 25 16 118 158 40 73 20 12 31 18 Ø11(PCD Ø202) PT1/4 M10×1.5P 3-M8×1.25P (PCDØ134) 80 47
MO-08 265 210 30 20 138 180 42 95 25 14 35 18 Ø11(PCD Ø243) PT1/4 M10×1.5P 3-M10×1.5P (PCDØ136) 80 47
MO-10 315 254 52 23 150 196 46 110 30 16 40 18 Ø13(PCD Ø285) PT1/4 M12×1.75P 3-M12×1.75P (PCDØ170) 80 47
MO-12 375 304 80 23 165 219 54 129 30 21 50 18 Ø17(PCD Ø340) PT3/8 M16×2P 3-M12×1.75P (PCDØ200) 80 55
ML-08 265 210 30 20 138 180 42 95 25 14 35 18 Ø11(PCD Ø243) PT1/4 M10×1.5P 3-M10×1.5P (PCDØ136) 80 47
MOT-04 157 115 - 15 77.5 104 26 49.5 14 10 23 13 Ø9(PCD Ø135) PT1/8 M8×1.25P 2-M8×1.25P (PCDØ90) 64 47
MOT-05 185 135 - 15 95 128 33 62 14 10 25 13 Ø9(PCD Ø165) PT1/4 M8×1.25P 2-M8×1.25P (PCDØ100) 80 47
MOT-06 224 169 25 16 118 158 40 73 20 12 31 18 Ø11(PCD Ø202) PT1/4 M10×1.5P 2-M8×1.25P (PCDØ134) 80 47
MOT-08 265 210 30 20 138 180 42 95 25 14 35 18 Ø11(PCD Ø243) PT1/4 M10×1.5P 2-M10×1.5P (PCDØ136) 80 47
MOT-10 315 254 52 23 150 196 46 110 30 16 40 18 Ø13(PCD Ø285) PT1/4 M12×1.75P 2-M12×1.75P (PCDØ170) 80 47
MODEL / SPEC. Q Piston Area
(cm2)
Plunger Stroke
(mm)
Jaw Stroke (Diameter)
mm
Max. Gripping Force
kgf (KN)
Max. Hydr.
Pressure
kgf/cm2 (Mpa)
Gripping Force
At Air Pressure
7 kgf/cm2 (0.7Mpa)
Weight
(kg)
Gripping
Range
MO-04 - 57 9 3.8 2400 (23.5) 15 (1.5) 930 (9.1) 7.05 Ø9~Ø115
MO-05 - 74 10 5.4 3285 (32.2) 20 (2.0) 950 (9.3) 11.2 Ø12~Ø135
MO-06 - 97 12 5.5 5040 (49.4) 20 (2.0) 1450 (14.2) 21.0 Ø15~Ø169
MO-08 3-M10×1.5P
(PCDØ186)
156 16 7.4 8100 (79.4) 20 (2.0) 2350 (23.0) 36.8 Ø20~Ø210
MO-10 3-M12×1.75P
(PCDØ230)
235 19 8.8 12210 (119.7) 20 (2.0) 3550 (34.8) 56.4 Ø33~Ø254
MO-12 3-M12×1.75P
(PCDØ260)
292 23 10.6 14500 (142.1) 20 (2.0) 4400 (43.1) 88.5 Ø40~Ø304
ML-08 3-M10×1.5P
(PCDØ186)
156 16.5 12 5202 (51) 20 (2.0) 1500 (14.7) 37.6 Ø20~Ø210
MOT-04 - 57 9 3.8 1900 (18.6) 12 (1.2) 930 (9.1) 6.9 Ø9~Ø115
MOT-05 - 74 10 5.4 2620 (25.6) 16 (1.6) 950 (9.3) 11.2 Ø12~Ø135
MOT-06 - 97 12 5.5 4030 (39.5) 16 (1.6) 1450 (14.2) 21.0 Ø15~Ø169
MOT-08 2-M10×1.5P
(PCDØ186)
156 16 7.4 6480 (63.5) 16 (1.6) 2350 (23.0) 36.8 Ø20~Ø210
MOT-10 2-M12×1.75P
(PCDØ230)
235 19 8.8 9760 (95.6) 16 (1.6) 3550 (34.8) 56.4 Ø33~Ø254
OPERATION EXAMPLE

Speed, Accurate, Automatic
4-jaws clamping and self-center
proimages/products/02-Pneumatic_Chucks_Series/MO/MO_view.jpg

proimages/products/02-Pneumatic_Chucks_Series/MO/MO_view_en.jpg

MB

NEW

Large Throunge Hole Power Chunk Fixture

With built-in type cylinder,it is ideal for machining application on working table.

  1. Rust-proof for Pneumatic Cyclinder? Inside wall of cyclinder being rustproof treated ;cyclinder can work under wet or high moisture circumstances without rusty or serized trouble.
  2. Dusts-proof and Waterproof: Dust-proof and Waterproof structure prevents work-chip and coolant water form entering into inside of chuck cyclinder to maintain its accuracy and lead to longer service life.
  3. Benefit of Built-in Cylinder: The cylinder is connected to chunk itself directly for obtaining better stability,less space,and higher machining efficiency.
DIMENSIONS
SPECIFICATIONS

Unit / mm

MODEL/SPEC. A B C D E F G H I J K L M O P
MB-06 228 173 45 16 118 158 40 73 20 12 31 18 4-Ø11 (PCDØ202) M10 x 1.5P 3-M8 x 1.25P (PCDØ134)
MB-08 270 215 52 17 130 172.5 42 95 25 14 35 18 4-Ø11 (PCDØ243) M10 x 1.5P 3-M10 x 1.5P (PCDØ150)
MB-10 315 256 75 19 146 190.5 46 110 30 16 40 18 4-Ø13 (PCDØ285) M12 x 1.75P 3-M12 x 1.75P (PCDØ182)
MODEL/SPEC. Q Piston Area
(cm2)
Plunger Stroke
(mm)
Jaw Stroke
(Diameter) (mm)
Max.Gripping Force
kgf (KN)
Max.Hydr. Pressure
kgf/cm2
Gripping Range Gripping Force At Air Pressure
7kgf/cm2    (0.7Mpa)
kgf   (KN)
Weight
(kg)
MB-06 -- 97 12 5.5 5040 (49.4) 20 (2.0) Ø20~Ø173 1450(14.2) 21.7
MB-08 3-M10×1.5P ( PCDØ186) 156 16 7.4 8100 (79.4) 20 (2.0) Ø25~Ø215 2350(23.0) 35.5
MB-10 3-M12×1.75P ( PCDØ232) 226 19 8.8 12330 (120.9) 21 (2.1) Ø37~Ø256 3400(33.3) 54
OPERATION EXAMPLE

Examples of Attaching Pneumatic Manual Switch/ Optional Accessoriesproimages/products/02-Pneumatic_Chucks_Series/MB/MB_view_en.jpg

 

PLVE

NEW

Pull Back Power Chuck Fixtures

Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.

  1. Rust-proof for Pneumatic Cylinder?Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
  2. Dusts-proof and Waterproof? Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
  3. Heavy Duty Clamping Design?Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor't deform.
DIMENSIONS
proimages/products/02-Pneumatic_Chucks_Series/PLVE/PLVE_dim.jpg
SPECIFICATIONS

Unit / mm

MODEL / SPEC. A B C D E F Max. F min. G Max. G min. H I K M
PLVE-06 224 169 M10x1.5P(PCDØ202) 17 140 45.65 35.65 14.65 4.65 70 - 35 Ø11(PCD 202)
PLVE-08 265 210 M10x1.5P(PCDØ243) 17 154 57.15 47.15 16.15 6.15 84 26 40 Ø11(PCD 243)
PLVE-10 315 254 M12x1.75P(PCDØ285) 20 185 67.6 51.6 21.6 5.6 100 32 50 Ø13(PCD 285)
MODEL / SPEC. N max. N min. P Q Piston Area
(cm2)
Plunger Stroke
(mm)
Jaw Stroke [Diameter]
(mm)
PLVE-06 56.69 54.01 3-M6x1P(PCDØ80) 3-M6x1P(PCDØ120) 91 10 5.3
PLVE-08 69.56 66.88 3-M10x1.5P(PCDØ136) 3-M10x1.5P(PCDØ186) 160 10 5.3
PLVE-10 87.44 81.61 3-M12x1.75P(PCDØ170) 3-M12x1.75P(PCDØ230) 215 16 11.6
MODEL / SPEC. Max. Gripping Force
kgf (KN)
Max. Pressure Setting
kgf/cm2 (Mpa)
Gripping Force
At Air Pressure 7kgf/cm2 (0.7Mpa)
kgt (KN)
Gripping Range
PLVE-06 2950 (29) 16 (1.57) 1270 (12.5) Ø35~Ø160
PLVE-08 4890 (48) 15 (1.47) 2240 (22) Ø40~Ø210
PLVE-10 4990 (49) 16 (1.57) 2140 (21) Ø50~Ø254
OPERATION EXAMPLE
proimages/products/02-Pneumatic_Chucks_Series/PLVE/PLVE_view.jpg

RTS,RTS-T

NEW Patent Number:M589083

ROTARY AIR CHUCK FIXTURES
( LOW TORQUE?BULIT-IN CHECK VALVE CONTINUOUS ROTATING )

  1. When the chuck is rotating continuously: Higher rotation speed to fit with more kind of working,the rotating speed has to be within the max speed limit.
  2. Built in Check Valve: Design with built in Check Valve.It's doesn't need to supply the air continuously and remain low working torque also reduce the air consumption.
  3. Dustproof and drainage patent structure: Can prevent the metal chips and coolant get into chuck inside while processing, and maintain.
  4. Integral pneumatic cylinder: Connect chuck and built-in cylinder to each other directly;thus enables operation stability. Moreover,it is more convenient for installation and operation since the use of draw tube and draw bar are no longer necessary.
  5. Rustproof treated cylinder: The cylinder won't get rusty and seized even wet or high moisture working environment.
DIMENSIONS
proimages/products/02-Pneumatic_Chucks_Series/RTS/RTS_dim.jpg
SPECIFICATIONS

Unit / mm

MODEL / SPEC. A B C D E F G H I J K L
RTS-05 140 85 16 60 6 182 33.6 62 14 10 25 6-M8 x 1.25P
RTS-06 170 93 20 80 7 215 40.4 73 20 12 31 6-M8 x 1.25P
RTS-08 215 112 30 110 8 255 42.4 95 25 14 35 6-M10 x 1.5P
RTS-10 255 120 43 140 8 300 46.4 110 30 16 40 6-M10 x 1.5P
RTS-05T 140 85 16 60 6 182 33.6 62 14 10 25 6-M8 x 1.25P
RTS-06T 170 93 20 80 7 215 40.4 73 20 12 31 6-M8 x 1.25P
MODEL / SPEC. M N
max.
N
min
O
max.
O
min
P R Thru-Hole(Diameter)(mm) Piston Area
(cm2)
Plunger Stroke
(mm)
Pressure
Setting Range
kgf/cm2 (Mpa)
Weight
(kg)
RTS-05 PCDØ118 26.93 24.62 20.05 6.55 18.5 6-M6×1P
(PCDØ92)
16 74 10  2 - 7 0.2-0.7 10
RTS-06 PCDØ147 36.46 33.69 21.55 15.55 18.5 6-M8×1.25P
(PCDØ120)
20 120 13  2 - 7 0.2-0.7 16.8
RTS-08 PCDØ185 44.92 41.52 29.55 17.55 19.5 6-M10×1.5P
(PCDØ155)
30 190 16  2 - 7 0.2-0.7 30.6
RTS-10 PCDØ220 53.63 49.59 36.55 17.05 21.5 6-M12×1.75P
(PCDØ190)
43 280 19  2 - 7 0.2-0.7 45.1
RTS-05T PCDØ118 26.93 24.62 20.05 6.55 18.5 2-M6×1P
(PCDØ92)
16 74 10  2 - 7 0.2-0.7 9.7
RTS-06T PCDØ147 36.46 33.69 21.55 15.55 18.5 2-M8×1.25P
(PCDØ115)
20 120 13  2 - 7 0.2-0.7 16.3
MODEL / SPEC. Jaw Stroke(Diameter)
(mm)
Max.Speed
(min-1)
Gripping Force At Air Pressure
7kgf/cm2 (0.7Mpa)
Gripping Range
kgf (KN)
RTS-05 4.6 450 1340 (13.1) Ø4-Ø136
RTS-06 5.5 350 2330 (22.8) Ø25-Ø166
RTS-08 6.8 300 3730 (36.5) Ø33-Ø215
RTS-10 8.0 250 5480 (53.7) Ø43-Ø255
RTS-05T 4.6 450 1340 (13.1) Ø4-Ø136
RTS-06T 5.5 350 2330 (22.8) Ø25-Ø166
OPERATION EXAMPLE
proimages/products/02-Pneumatic_Chucks_Series/RTS/RTS_demo.jpg

RT

ROTARY AIR CHUCK FIXTURES
( INTERMITTENT OPERATION )
Suitable for light cutting
It's ldeal for dividing or cutting work pieces by mounting the chuck on indexing table or rotary table.The distinctive feature is that the chuck rotates with the spindle of indexing table or rotary table.

It's ldeal for dividing or cutting work pieces by mounting the chuck on indexing table or rotary table. The distinctive feature is that chuck rotates with the spindle of indexing table or rotary table.

  1. The chuck is designed for intermittently rotate in limited rotary speed with rotary table.
  2. Rustproof treated cylinder : The cylinder won't get rusty and seized even in wet or hign moisture working environment.
  3. Integral pneumatic cylinder :Connect chuck and built-in cylinder to each other directly;thus enables operation stability.Moreover,it is more convenient for installation and operation since the use of draw tube and draw bar are no longer necessary.
DIMENSIONS
proimages/products/02-Pneumatic_Chucks_Series/RT/RT_dim.jpg
SPECIFICATIONS

Unit / mm

MODEL / SPEC. A B C D E F G H I J K L
RT-05 140 85 16 60 6 182 33.6 62 14 10 25 6-M8×1.25P
RT-06 170 93 20 80 7 215 40.4 73 20 12 31 6-M8×1.25P
RT-08 215 112 30 110 8 255 42.4 95 25 14 35 6-M10×1.5P
MODEL / SPEC. M Nmax. Nmin. O max. O min. P Q R Thru-Hole
(Diameter) mm
Piston Area (cm2) Plunger Stroke (mm) Jaw Stroke (Diameter) mm
RT-05 PCDØ118 26.93 24.62 20.05 6.55 26 - 3-M8×1.25P
(PCDØ92)
16 74 10 4.6
RT-06 PCDØ147 36.46 33.69 21.55 15.55 26 - 3-M10×1.5P
(PCDØ130)
20 120 13 5.5
RT-08 PCDØ185 44.92 41.52 29.55 17.55 27 3-M10×1.5P
(PCDØ186)
3-M10×1.5P
(PCDØ146)
30 190 16 6.8
MODEL / SPEC. Max.Speed
r.p.m (min-1)
Max. Pressure
kgf/cm2 (Mpa)
Gripping Force
At Air Pressure
7kgf/cm2 (0.7Mpa)
kgf (KN)
Gripping
Range
RT-05 51 7 (0.7) 1340 (13.1) Ø4-Ø140
RT-06 41 7 (0.7) 2330 (22.8) Ø25-Ø170
RT-08 33 7 (0.7) 3730 (36.5) Ø33-Ø215
OPERATION EXAMPLE
proimages/products/02-Pneumatic_Chucks_Series/RT/RT_demo.jpg

MA

2 Actuating Axes Self-Centering Solid Air Chuck Fixtures

2 actuating axes self-centering solid air chuck fixtures is great for machining center. Two pairs of jaws clamp one after another to assure a workpiece to be locked completely.

  1. Rust-proof for Pneumatic Cylinder? Inside wall of cylinder being rustproof treated? cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
  2. Dusts-proof and Waterproof? Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
  3. 4-jaw Clamping and Self-centering? 4-jaw clamping are steadier for machining. Two pairs of jaws are moved independently to assure complete lock and self-centering.
DIMENSIONS
proimages/products/02-Pneumatic_Chucks_Series/MA/MA-dim.jpg
SPECIFICATIONS

Unit / mm

MODEL / SPEC. A B D E F G H I J K L M N
MA-06 224 175 20 130 170 40 73 20 12 31 18 Ø11 Ø202
MA-08 265 210 22 154 196 42 95 25 14 35 18 Ø11 Ø243
MA-10 315 250 25 176 222 46 110 30 16 40 18 Ø13 Ø285
MODEL / SPEC. O P Q A Piston Area (cm2)
Push Side Pull Side
MA-06 M10×1.5P ( PCDØ202) 4- M8×1.25P ( PCDØ124) 4- M8×1.25P ( PCD Ø156) 127 108
MA-08 M10×1.5P ( PCDØ243) 4- M10×1.5P ( PCDØ140) 4- M10×1.5P ( PCD Ø186) 184 157
MA-10 M12×1.75P ( PCDØ285) 4- M10×1.5P ( PCDØ176) 4- M10×1.5P ( PCD Ø224) 270 239
MODEL / SPEC. B Piston Area (cm2) Plunger Stroke
(mm)
Jaw Stroke (Diameter)
mm
Gripping Force At Air Pressure
7kgf/cm2(0.7Mpa)
Weight (kg) Gripping
Range
Push Side Pull Side kgf (KN)
MA-06 122 117 12 5.5 4500 (44) 24.8 Ø25~Ø175
MA-08 176 169 16 7.4 6400 (63) 41.3 Ø30~Ø210
MA-10 254 241 19 8.8 9500 (93) 65.6 Ø35~Ø250
OPERATION EXAMPLE
proimages/products/02-Pneumatic_Chucks_Series/MA/MA-oper.jpg

TK,TK-T

Patent Number:M503958

2?3-Jaw Super Precision Air Chucks

  1. Pre-machined tapped holes and lubrication path? There are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubricate the chuck automatically.
  2. Built-in Cylinder? Connect cylinder directly to the chuck for stable gripping.
  3. Precise soft jaw positioning?It’s easy to remount soft jaw to the correct position with dowel pins on it.
  4. High gripping precision brings better quality and efficiency?Good coaxiality and repeatability of gripping are able to achieve the accuracy of “μ degree machining processes can be simplified or shortened to make high precision machining with high efficiency come ture.
DIMENSIONS
proimages/products/02-Pneumatic_Chucks_Series/TK/TK_dim.jpg
SPECIFICATIONS

Unit / mm

MODEL / SPEC. A B C D E D1 d
(H7)
D2 H h W M1
TK-04 20.75 12.7 12.7 101.6 30 82.55 18 25 70.3 3.2 16 6-M5×0.8P(PCD Ø88.9)
TK-06 39.75 12.7 12.7 152.4 40 124.97 26 34.5 70.3 3.2 22 6-M6×1P(PCD Ø135.89)
TK-08 65.75 25.4 - 203.2 45 167.64 50 50 99.5 7.0 25 6-M10×1.5P(PCD Ø182.88)
TK-04T 20.75 12.7 12.7 101.6 30 82.55 18 25 70.3 3.2 16 6-M5×0.8P(PCD Ø88.9)
TK-06T 39.75 12.7 12.7 152.4 40 124.97 26 34.5 70.3 3.2 22 6-M6×1P(PCD Ø135.89)
TK-08T 65.75 25.4 - 203.2 45 167.64 50 50 99.5 7.0 25 6-M10×1.5P(PCD Ø182.88)
MODEL / SPEC. M2 M3 T1 T2 T3 R1
TK-04 6-M5×0.8P 9-Ø3.18 3-M5×0.8P(PCD Ø88.9) ? ? 30°
TK-06 12-M5×0.8P 9-Ø3.18 3-M6×1P(PCD Ø135.89) 3-M6×1P(PCD Ø110) 3-M6×1P(PCD Ø135.89) 30°
TK-08 6-M10×1.5P 6-Ø6.36 3-M8×1.25P(PCD Ø182.88) 3-M8×1.25P(PCD Ø150) 3-M8×1.25P(PCD Ø100) 30°
TK-04T 4-M5×0.8P 6-Ø3.18 2-M5×0.8P (PCDØ70) - - -
TK-06T 8-M5×0.8P 6-Ø3.18 2-M6×1P (PCDØ110) - - -
TK-08T 4-M10×1.5P 4-Ø6.36 2-M8×1.25P (PCDØ150) - - -
MODEL / SPEC. R2 R3 Jaw Stroke (Diameter)
mm
Gripping Force
At Air Pressure
7 kgf/cm2 (0.7Mpa)
Max. Speed
r.p.m (min-1)
Weight
(kg)
TK-04 - - 3 800 (7.8) 4500 4.4
TK-06 30° 75° 3 1200 (11.7) 4200 9.8
TK-08 30° 30° 3 1800 (17.6) 2500 26.3
TK-04T - - 3 800 (7.8) 3500 4.2
TK-06T - - 3 1200 (11.7) 3500 9.5
TK-08T - - 3 1800 (17.6) 2000 25.1

MTK,MTK-T

3-Jaw Super Precision Air Chuck Fixtures

With built-in type cylinder, it is ideal for machining application on working table.

  1. Pre-machined tapped holes and lubrication path? There are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubricate the chuck automatically.
  2. Built-in Cylinder? Connect cylinder directly to the chuck for stable gripping.
  3. Precise soft jaw positioning?It’s easy to remount soft jaw to the correct position with dowel pins on it.
  4. High gripping precision brings better quality and efficiency?Good coaxiality and repeatability of gripping are able to achieve the accuracy of “μ degree machining processes can be simplified or shortened to make high precision machining with high efficiency come ture.
DIMENSIONS
proimages/products/02-Pneumatic_Chucks_Series/MTK/MTK_dim.jpg
SPECIFICATIONS

Unit / mm

MODEL / SPEC. A B C D d
(H7)
E F H W L M
MTK-04 148 17 20.75 101.6 18 12.7 12.7 80 16 13 Ø9 (PCDØ130)
MTK-06 200 18 39.75 152.4 26 12.7 12.7 81 22 18 Ø11 (PCDØ180)
MTK-04T 148 17 20.75 101.6 18 12.7 12.7 80 16 13 Ø9 (PCD Ø130)
MTK-06T 200 18 39.75 152.4 26 12.7 12.7 81 22 18 Ø11 (PCDØ180)
MODEL / SPEC. M1 M2 M3 N T1 T2 T3
MTK-04 6- M5×0.8P(PCDØ88.9) 6-M5×0.8P 9-Ø3.18 3-M8×1.25P 3-M5×0.8P
(PCDØ88.9)
- -
MTK-06 6-M6×1P(PCDØ135.89) 12-M5×0.8P 9-Ø3.18 4-M10×1.5P 3-M6×1P
(PCDØ135.89)
3-M6×1P
(PCD Ø110)
3- M6×1P
(PCD Ø135.89)
MTK-04T 6- M5×0.8P(PCDØ88.9) 4-M5×0.8P 6-Ø3.18 3-M8×1.25P 2-M5×0.8P
(PCDØ70)
? ?
MTK-06T 6-M6×1P(PCDØ135.89) 8-M5×0.8P 6-Ø3.18 4-M10×1.5P 2-M6×1P 
(PCDØ110)
? ?
MODEL / SPEC. Jaw Stroke
(Diameter) mm
Gripping Force
At Air Pressure
7 kgf/cm2 (0.7Mpa)
Weight
(kg)
MTK-04 3 800 (7.8) 6.2
MTK-06 3 1200 (11.7) 13
MTK-04T 3 800 (7.8) 6
MTK-06T 3 1200 (11.7) 12.6
OPERATION EXAMPLE
proimages/products/02-Pneumatic_Chucks_Series/MTK-T/MTK-T_view_en.jpg
 

 

 

 

 

 

© 2000-2008 CopyRight by Mechatronics Machine Tools Co.,Ltd.
Tel. ติดต่อคุณภูรินทร์ 098-4288648 Email: sales@mechatronics.co.th  Fax. 038-111360  Website. www.mechatronics.co.th
disclaimer | privacy | contact us

  Sale Login Warehouse Login Driver Login