Input circuit: ใช้ opto-isolator เชื่อมวงจรระหว่าง switch input กับ microcontroller แรงดันที่ใช้ในวงจรเพียง 15โวลท์ จึงไม่เป็นอันตรายต่อผู้ใช้งานในขณะที่ปรับแต่ง pressure switch หรืด flow switch
Switch status |
Voltage across switch |
open |
15V. |
close |
0V. |
Output circuit: ใช้ relay output เพื่อจ่าย 220โวลท์ให้กับ magnetic contactor, control relay หรือ pilot lamp ในส่วนของวงจร alarm จะดัง 2 วินาที แล้วหยุด 3 วินาที จนกว่าจะกด alarm reset push botton switch.
Level detector: วงจรวัดระดับน้ำสามารถใช้ได้ทั้งกับลูกลอย (float switch) และก้านวัด (probe)ในกรณีมีน้ำวัดแรงดันได้ 0โวลท์ ถ้าน้ำขาดวัดแรงดันได้ 5โวลท์
Position |
Refered IC(LM339) |
d1 |
U30-pin2 |
d2 |
U30-pin1 |
d3 |
U30-pin14 |
u1 |
U31-pin2 |
u2 |
U31-pin1 |
u3 |
U31-pin14 |
u4 |
U31-pin13 |
u5 |
U30-pin13 |
|