BELIMO Globe Valves
H2..X-S, 2-way, with internal thread
H3..X-S, 3-way, with internal thread
H6..W-SP, 2-way, with flange PN16
H7..W-S, 3-way, with flange PN16
H7..W-D, 3-way, with flange PN16
Last Update : 15:42:02 18/11/2015
H6..X..-S(P)2 Globe valve, 2-way, Flange, PN 25
Globe valve, 2-way, Flange, PN 25
? For closed (high temperature) hot water and steam systems in the non-critical range
? For water-side modulating control of air-handling and heating systems
Brand : REGIN
Model : RCF-230D
Room thermostat for fan-coil applications
with on/off outputs.
Intended to control heating and/or cooling in 2- or 4-pipe
installations. Setpoint and fan speed are set using the buttons on the front.
Brand : REGIN
Model : RC-DO Room controller with display
Room controller with display
? Awarded design
? Simple installation
? On/Off or 0...10 V control
RC-DO is a room controller from the Regio Mini series
intended to control heating and cooling in a zone control
The MODEL OSW-100 Wall Mount Occupancy Sensor is an infrared sensor designed
to help automate building control systems. The Model OSW-100 has a wide 110?
viewing angle to capture movement up to 49.2? (15 m) away.
? Delay processor suppresses switch activation during momentary occupancy
? Lighting control
? Building energy conservation
The Siemens Point Pickup Modules (PPM) are expansion I/O devices that communicate on a BACnet master-slave/token-passing (MS/TP) network, allowing for the incorporation of a cluster of remote points into the Building Automation Station over the MS/TP network.
The PPM family leverages the MS/TP network to extend the reach of any BTL-listed
BACnet Building Controllers application program.
Each Universal Input can be configured for analog or digital input. Input/Output type is configured by writing to BACnet object properties.
The EXOcompact controllers are perfect for stand-alone applications, e.g. zone control, control of heating
and air handling units, as well as for system integration. They have a powerful processor and are available
in three sizes with 8, 15 or 28 I/Os, with or without display.
The controller for simple applications
Optigo is a series of compact, economic and versatile stand-alone controllers. They are pre-programmed
and intended for smaller applications. The controllers are extremely easy to install, commission and control.