Brand : ASHUN
Nylon Tube
? Excellent in weather resistance
? Good aging
? Resists abrasion and vibration
? High tensile strength and modulus of elasticity
? High impact resistance, a high heat distortion?temperature
??Can withstand contact with chemicals, alkalis,?dilute?acids or oxidizing agents
Application
For Hydraulic Hoses, Robotics, and Vacuum, Fuel, Vapor, Air and Brake lines.?Its Heat Resistance and UV Stabilization Make it Resistant to?Stress-Cracking, So it Works Well in Sunny Areas.
Brand : ASHUN
PolyurethaneTube
? High?flexibility?
? Small bending radius
? Widely used in many applications?
??Available in ether and ester types
??Optimum abrasion resistance
??High tensile strength
??Low temperature flexibility
Application
Automated machinery, coating machinery, all kinds of pneumatic tools, pneumatic & hydraulic machinery, construction and various pneumatic tools. Polyether based polyurethane tube is hydrolysis-resistant, anti-bacterial & anti-fungous, and it can be used for gardening, cleaning, water hoses and other purposes.?Ether type polyurethane tube?is resistance to hydrolysis, fungus and weatherability. Ester type polyurethane tube give maximum abrasion resistance and good oil, solvent and great resistance.
Brand : AUTOFLEX
FLEXIBLE PVC SPIRAL STEEL WIRE REINFORCED HOSE OR FLEXIBLE PVC SUPER SUN SPRING HOSE: SUPER SUN SPRING HOSE.
With hard steel wires put inside, this hose withstands to decompression, which is appropriate for vacuuming applications.Superior in transparency, this hose is appropriate for piping of operating oil
Brand : POFPO
POFPO Rubber flexible joint are desi gned for tough demanding indusreial application,as found in : Air conditioning-heating and ventilating systems,chemical-petrochemical and industrial process piping systems. Power generating systems, marine service, pulp & paper systems,water-wastewater sewage and pollution control system. Instsalled next to mechanical equiment or between the anchor point of piping system. Specify the POFPO Rubber flexible joint to :
1.Absorb pipe/movement/stress
2. Decrease systems noise
3. Isolate Vibration
4. Compensate alignment/offset
5. Eliminate electrolysis
6. Protect against start up,Surge forces
Features:
-Vibration,Sound And Shock Absorption
-Higher Burst Strength
-Greater Recovery From Movement
-Free From Corrosion
-Security Assured In Usage
-Low Deformation Under Pressure
-Suitable For Suction And Delivery
-Greater Movements are Availlable
HYDRAULIC HOSE PH180 - SAE 100R-15 SUPER HIGH PRESSURE HYDRAULIC LINES 420 BAR
Application: 420 bar super high pressure Hydraulic Lines and hydrostatic transmission lines. Also, suitable for impulse surge lines with more life cycles. For use with petroleum, synthetic or water based emulsions in Hydraulic systems Suitable for Earthmoving equipments and machineries/systems.
Applicable Standard: Standard: SAE 100 R15
Construction:
Core: Oil resistant Synthetic rubber
Reinforcement: Four or Six high tensile steel wire spirals
Cover: Black Color, Synthetic rubber resistant to oil, weather and abrasion
Temperature Range: Continuous: -40?C to +120?C
HYDRAULIC HOSE PH154 - SAE J517-100-R2 / EN 853 2SN HIGH PRESSURE HYDRAULIC LINES 80 TO 415 BAR
Application: High Pressure Hydraulic Lines 80 to 415 bar and requires compact outer dia. For use with petroleum, synthetic or water based fluids in Hydraulic systems Suitable for Agricultural, Earthmoving & Material handling equipments and machineries/systems.
Applicable Standard: Standard: SAE J517 ? 100 R2 / EN 853-2SN
Construction:
Core: Oil & water resistant Synthetic rubber
Reinforcement: Double steel wire braids
Cover: Black Color, Synthetic rubber resistant to weather and abrasion ,oil & ozone
Temperature Range:
Continuous: -40?C to +120?C
Impulse Cycles : 200,000
Tested upto: 400,000 cycles,upto 1? I.D.
HYDRAULIC HOSE PH153 - SAE J517-100-R1 / EN 853 1SN MEDIUM PRESSURE HYDRAULIC LINES 40 TO 250 BAR
Application: MEDIUM Pressure Hydraulic Lines 40 to 250 bar and requires compact outer dia. For use with petroleum, synthetic or water based fluids in Hydraulic systems Suitable for Agricultural, Earthmoving & Material handling equipments and machineries/systems
Applicable Standard: Standard: SAE J517 ? 100 R1 / EN 8531SN
Construction:
Core: Oil & water resistant Synthetic rubber
Reinforcement: Single steel wire braid
Cover: Black Color, Synthetic rubber resistant to weather and abrasion, oil & ozone.
Temperature Range:
Continuous: -40?C to +120?C
Impulse Cycles : 150,000
Tested upto: 300,000 cycles, upto 1I.D.
HYDRAULIC HOSE PH147 - SAE J517-100-R6 / EN 854 / VERY LOW PRESSURE AND LOW IMPULSE HYDRAULIC LINES 20 TO 35 BAR
Application: Very low pressure and low impulse hydraulic lines 20 to 35 bar.for use with petroleum, synthetic or water based fluids in Hydraulic systems. Suitable for Agricultural, Stationary equipments and hydraulic systems.
Applicable Standard: Standard: SAE J517 ? 100 R6 / EN 854
Construction:
Core: Oil resistant Synthetic rubber
Reinforcement: Single fiber braid
Cover: Black Color, Synthetic rubber resistant to oil, weather and abrasion
Temperature Range: Continuous: -40?C to +120?C
HYDRAULIC HOSE PH146 - SAE J517-100-R5 MEDIUM PRESSURE HYDRAULIC LINES 25 TO 210 BAR
Application: MEDIUM Pressure Hydraulic Lines 25 to 210 bar.
For use with fluids in Hydraulic systems Can also be used in air and water. Suitable for Agricultural, Earthmoving & Material handling equipments and machineries/systems
Applicable Standard: Standard: SAE J517 ? 100 R5
Construction:
Core: Oil and Water resistant Synthetic rubber
Reinforcement: Single steel wire braid
Cover: Black Color, single braid of textile fiber
Temperature Range: Continuous: -40?C to +120?C
HYDRAULIC HOSE PH144 - SAE J517-100-R3 / EN 854 /LOW PRESSURE AND LOW IMPULSE HYDRAULIC LINES 30 TO 110 BAR
Application: Low pressure and low impulse hydraulic lines 30 to 110 bar.for use with petroleum, synthetic or water based fluids in Hydraulic systems. Suitable for Agricultural, Construction & Material handiling equipments and machineries/systems.
Applicable Standard: Standard: SAE J517 ? 100 R3 / EN 854
Construction:
Core: Oil resistant Synthetic rubber
Reinforcement: Double fiber braids
Cover:Black Color, Synthetic rubber resistant weather and abrasion
Temperature Range:
Continuous: -40?C to +120?C
TEFLON (PTFE) HOSE PH382 GAS HOSE - DOUBLE BRAID OF SUS 304/316
Application: P.T.F.E. hose has an excellent temperature characteristics both in high and low temperature, Excellent chemical resistance, non contamination properties, low coefficient of friction and resists deterioration. Therefore the hose is used generally in applications where all or one of the above properties is the main criteria. Transport of cryogenic gases at high pressure.
Applicable Standard: Standard: Polyhose proprietary product.
Construction:
Core: Special quality of sintered tube of polytetrafluoroethylene (P.T.F.E.).
Reinforcement: Double braids of 303/304 series of stainless steel wire
Temperature Range:
Continuous: -60?C to +260?C
THERMOPLASTIC PAINT SPRAY HOSE PH342 W/P.1.00 BAR AIRLESS PAINT SPRAY SYSTEMS FOR 120 TO 350 BAR - SINGLE STEEL WIRE BRAID
Application: Airless paint spray systems for 120 to 350 bar.
Suitable for applications requiring chemical resistance to solvents and aggressive fluids due to low permeation value of polyamide, the hose is also suitable for industrial gases.
Applicable Standard: Standard: Polyhose proprietary Hose.
Construction:
Core: Polyamide
Reinforcement: Single steel wire braid
Cover: Blue color Polyurethane and optional pin pricked.
Temperature Range:
Continuous: -40?C to +100?C Temp not to exceed +70?C for Air and water based fluids.
THERMOPLASTIC HYDRAULIC HOSE PH350 / PH351 VERY H/P JACK HOSE HYDRAULIC LINES 520 TO 700 BAR
Application: Very High Pressure Hydraulic Lines 520 to 700 bar.
Compact, high pressure, light weight, high abrasion resistance and low change in length for use with petroleum, synthetic or water based fluids in Hydraulic Systems mainly used for rescue, safety equipments, bolt tensioning tools and jacking & re-railing equipments. Also, suitable for earthmoving and material handling equipments.
Applicable Standard: Standard: Polyhose proprietary hose.
Construction:
Core: Thermoplastic Elastomer
Reinforcement:PH350 Double steel wire braids, PH351 Single/Double braids of aramid fibre with single steel wire braid
Cover:Red/Orange color Polyurethane, Available Twin & Multi lines with different Hose combination and size.
Temperature Range:
Continuous: -40?C to +100?C Temp not to exceed +70?C for Air and water based fluids.
THERMOPLASTIC HYDRAULIC HOSE PH149 - SAE 100R8 / DIN EN855 HIGH PRESSURE HYDRAULIC LINES 100 TO 420 BAR
Application: Highpressure Hydraulic Lines 100 to 420 bar.
Compact, high pressure, light weight and low change in length. Suitable for hydraulic application with increased resistance to abrasion. For use with petroleum, synthetic or water based fluids in hydraulic systems. Suitable for Agricultural machinery, Earthmoving, Safety, Rescue and material handling equipments. Can be used for industrial gase and other applications, please consult manufacturer.
Applicable Standard: Standard: SAE 100 R8 / DIN EN 855
Construction:
Core: Thermoplastic Elastomer
Reinforcement: 1 or 2 braid of Aramid fibre
Cover: Black color, Pin Pricked ? Polyurethane. Available twin and multi lines with different hose combination and size. Also, special colors up on request.
Temperature Range:
Continuous: -40?C to +100?C temp. not to exceed +70?C for Air and water based fluids.
THERMOPLASTIC HYDRAULIC HOSE PH148 - SAE 100R7 / DIN EN855 MEDIUM PRESSURE HYDRAULIC LINES 70 TO 210 BAR
Application: Medium Pressure Hydraulic Lines 70 to 210 bar.
Suitable for Hydraulic application with increased resistance to abrasion. For use with petroleum, synthetic or water based fluids in Hydraulic systems. Suitable for Agricultural machinery, Earthmoving, Articulating & Telescopic booms and Material handling equipments. Can be used for industrial gases and other applications, please consult manufacturer.
Applicable Standard: tandard: SAE 100 R7 / DIN EN 855
Construction: Core: Thermoplastic Elastomer
Reinforcement: 1 braid of synthetic fibre
Cover: Black color, Pin Pricked ? Polyurethane. Available twin and multi lines with different hose combination and size. Also, special colors up on request.
Temperature Range: Continuous: -40?C to +100?C Temp. not to exceed +70?C for Air and Water based fluids
TEFLON (PTFE) HOSE PH381 EXCEEDS SAE J517 / 100R14 SMOOTH BORE PTFE HOSE 2 W/B
Application: P.T.F.E. hose has an excellent temperature characteristics both in high and low temperature, Excellent chemical resistance, non contamination properties, low coefficient of friction and resists deterioration. Therefore the hose is used generally in applications where all or one of the above properties is the main criteria.
Applicable Standard: Standard: Exceeds SAE J517 ? 100R14 pressure requirements.
Construction:
Core: Sintered tube of polytetrafluoroethylene (P.T.F.E.).
Reinforcement: Double braids of 303/304 series of stainless steel wire
Temperature Range:
Continuous: -54?C to +260?C
TEFLON (PTFE) HOSE PH370 CONVOLUTED / PH371 CONVOLUTED CONDUCTIVE
Aplication: P.T.F.E. hose has an excellent temperature characteristics both in high and low temperature, Excellent chemical resistance, non contamination properties, low coefficient of friction and resists deterioration. Therefore the hose is used generally in applications where all or one of the above properties is the main criteria in automotive, chemical, pharmaceutical & food processing, plastic & rubber molding machines. Also, for some applications the tube can also be made conductive to dissipate electro-static Charges.
Applicable Standard: Standard: Polyhose proprietary product.
Construction:
Core: Helically convoluted sintered tube of polytetrafluoroethylene (P.T.F.E.).
Reinforcement: Single braid of 304/316 series of stainless steel wire
Temperature Range:
Continuous: -54?C to +260?C
TEFLON (PTFE) HOSE PH179 - SAE J517 100R14 SMOOTH BORE PTFE HOSE
Application: P.T.F.E hose has an excellent temperature characteristics both in high and low temperature, Excellent chemical resistance, non contamination properties, low coefficent of friction and resists deterioration. Therefore the hose is used generally in applications where all are one of the above properties is the main criteria.
Applicable Standard: Standard: SAE J517 ? 100R14
Construction:
Core: Sintered tube of polytetrafluoroethylene (P.T.F.E.).
Reinforcement: Single braid of 303/304 series of stainless steel wire
Temperature Range:
Continuous: -54?C to +260?C
LARGE BORE INDUSTRIAL HOSE PH642 XLPE CHEMICAL SUCTION AND DISCHARGE HOSE
Application: Excellent in handling petroleum based products, hydrocarbon solvents, oxidising chemicals, major strong acid and alkali as well as organic fluid etc.
Construction:
Core: Synthetic rubber with XLPE liner.
Reinforcement: Plies of synthetic cords with helix wire.
Cover: Green color EPDM, wrapped type, abrasion and weather resistant.
Temperature Range: Continuous: -20?C to +120?C.
LARGE BORE INDUSTRIAL HOSE PH631 INDUSTRIAL DUTY AIR HOSE W/P.20 BAR
Application: For conveying air from compressors and blowers.
Construction:
Core: Synthetic rubber resistant to high temperature and oil mist.
Reinforcement: Synthetic yarn fabric.
Cover: Synthetic rubber resistant to ozone, weather and abrasion.
Temperature Range: Continuous: -20?C to +85?C.
LARGE BORE INDUSTRIAL HOSE PH625 BUNKER TRUCK HOT AIR BLOWER HOSE W/P.10 BAR
Application: For Hot Dry Oilless Air feeding to Bunker Trucks for Discharge of Bulk Material like Dry Cement, Fly Ash, Query Dust, Sand, etc., in Construction Industry.
Construction:
Core: Synthetic rubber blend to withstand high temperature blower air.
Reinforcement: High tensile synthetic yarn.
Cover: Synthetic rubber resistant to ozone, weather and abrasion.
Temperature Range: Continuous: -30?C to +180?C.
LARGE BORE INDUSTRIAL HOSE PH624 SHOT BLASTING HOSE W/P.12 BAR
Application: Suitably designed long lasting heavy duty hose for use in sand, metal grits and foundry waste with conductive rubber compound to ensure static electricity dissipation, abrasion loss of the tube according to ISO 4649: 50 ?5mm3.
Construction:
Core: Anti static Synthetic / Natural rubber blended.
Reinforcement: 2 or 4 Plies of synthetic cords.
Cover: Anti static Synthetic / Natural rubber blended, wrapped type, excellent abrasion resistant.
Temperature Range: Continuous: -20?C to +80?C.
LARGE BORE INDUSTRIAL HOSE PH623 BULK MATERIAL SUCTION AND DISCHARGE HOSE
Application: For suction and discharge of bulk material dry cement, gravel, sand, etc., in construction industry.
Construction:
Core: Natural rubber blend reistant to abrasion.
Reinforcement: High tensile synthetic yarn with wire helix and copper wire.
Cover: Synthetic rubber resistant to ozone, oil, weather and abrasion.
Temperature Range:
Continuous: -30?C to +75?C.
LARGE BORE INDUSTRIAL HOSE PH611 OIL / FUEL SUCTION AND DISCHARGE HOSE W/P.10 BAR
Application: Mandrel built heavy duty water suction and discharge hose for handling grades of gasoline or petroleum oils of aromatic content upto 50% from tank truck, in dispensing station, etc., during winter/summer seasons and withstands full vacuum.
Construction: Core: NBR blended..
Reinforcement: Plies of synthetic cords with steel helix and anti static copper wire.
Cover: SBR blended, wrapped type, weather, oil, ozone, abrasion resistant.
Temperature Range: Continuous: -40?C to +85?C.